Something Different

I'm still trying to finish projects and WIPs so I can tidy my summer sewing stuff away. I found an unfinished project from years ago when I was putting some felt offcuts away. Hopefully, this link will show some of the pieces I made, if not search my photostream for 'embellished'. It inspired me to finish it off and make some more. So I had a rummage through my offcuts and found lots of nice ones, so many that I started to think that maybe I wanted to do something a bit bigger, like a notebook cover (surprise, surprise!). I found some thin pieces of felt to use as a base and sewed them together. I really wanted to make something the complete opposite of the carefully measured and carefully and neatly sewn notebook covers I usually make. So after spreading all the felt offcuts out, I got some contrasting sewing thread and set to work attaching the pieces to my felt base. I didn't expect it to take as long as it did and I got through quite a few episodes of Foyle's War while I sewed :)

When I'd attached all the pieces, I attached a piece of thin blue cotton fabric to hide all the stitching and thread. Then I folded the flaps in, machine stitched them in place, then hand stitched the top and bottom edges. I think you'll agree, that it's nothing like what I usually make :)  This is the front:

And this is the back:

I tried hard to make sure nothing matched, and that it wasn't too neat or even, including the top and bottom edges, I just followed the edges of the base felt. This is the cover opened out:

I didn't attach felt pieces to the base where the flaps would be, I didn't want it to be too thick. The felt I used for the flaps was originally white merino and cotton which I experimented on with direct dyeing.

I also made a strap closure for it in much the same way as I made the book:

It just fits around the book and clips together with a Delrin clip.

I thought it'd stick out like  a sore thumb in my etsy shop, but surprisingly it doesn't. But maybe that's because it probably has a little offcut from almost every other piece in there with it!

Mixed Media Book Cover and Camera Case

As much as I really liked the mixed media piece that I made last week as it was, I did want to make something out of it. I made sure the piece of fabric I worked on was big enough for a book cover, but the finshed piece was too thick for that. I turned it over, folded it, measured it, looked at it, thought about it, then decided I could make a book cover out of it if I cut it and used different felt for the inside flaps. So, more measuring, hunting for felt and sewing of felt to fabric. This is what the inside looked like before I'd quite finished the bottom edge:

And, this is what it looked like once all the edges were finished:

I'm not sure whether I prefer it with the red part on the front:

Or whether I like the blue better:

I had quite a good sized piece left over, and I actually really like the green part the best, so I thought I'd use it for a gadget/camera/phone case. This is one side:

And this is the other:

I really enjoyed making the mixed media piece and the cover and case, and I don't feel so odd for saving all the tiniest bits of felt scraps 'just in case' now :)